Ziggo

• 01 | Ziggo - IPv4
• 02 | Ziggo - IPv6

01 | Ziggo - IPv4

Ziggo is in tegenstelling tot KPN heel simpel op te zetten gezien je bij Ziggo direct een IP krijgt op je WAN ipv op een PPPoE tunnel.

Stap 1 - WAN interface configureren

config system interface
    edit "wan1"
        set vdom "root"
        set mode dhcp
        set type physical
        set role wan
        set dns-server-override disable
    next
end

Stap 2 - Statische route aanmaken

config router static
  edit 0
    set device wan1
  next
end

Stap 3 - Policy aanmaken

config firewall policy
    edit 0
        set name "any to internet - IPv4"
        set srcintf "any"
        set dstintf "wan1"
        set action accept
        set srcaddr "all"
        set dstaddr "all"
        set schedule "always"
        set service "ALL"
        set logtraffic all
        set nat enable
    next
end

Stap 4 - Internet connectiviteit testen

execute ping google.com

 

02 | Ziggo - IPv6

Stap 1 - WAN interface configureren

config system interface
    edit "wan1"
        set vdom "root"
        set mode dhcp
        set type physical
        set role wan
        config ipv6
            set ip6-mode dhcp
        end
        set dns-server-override disable
    next
end

Stap 2 - Statische route aanmaken

config router static6
    edit 0
        set device "wan1"
    next
end

Stap 3 - LAN interface configureren met IPv6 adres

IP adressen in het netwerk worden uitgedeeld met SLAAC in deze instructie, hierdoor is er geen DHCP server configuratie nodig.

config system interface
    edit "VL2001"
        config ipv6
            set ip6-mode delegated
            set ip6-send-adv enable
            config ip6-delegated-prefix-list
                edit 1
                    set upstream-interface "wan1"
                    set subnet 2001:xxxx:yyyyy:2001::/56
                next
            end
        end
        set interface "LACP" ## Change to physical interface
        set vlanid 2001
    next
end

Stap 4 - Policy aanmaken

config firewall policy
    edit 0
        set name "any to internet - IPv6"
        set srcintf "any"
        set dstintf "wan1"
        set action accept
        set srcaddr6 "all"
        set dstaddr6 "all"
        set schedule "always"
        set service "ALL"
        set logtraffic all
    next
end

Stap 5 - Internet connectiviteit testen

execute ping6 google.com